You have no items in your shopping cart.
Filters
Search
Close

Brother Binder Foot - F014N

Manufacturer: Brother
Brother Binder Foot The design of this foot will place your ready-made bias tape, or will fold and place pre-cut bias strips with widths less than 7mm, correctly for easy sewing to the edge of a fabric.
£15.99 inc VAT
+ -

Attaches bias tape with widths less than 7mm (1/4") using straight, zigzag or decorative stitches. With a tape guide, this makes attractive binding similar to pre-folded or unfolded bias tape.

Instructions for use

1. Before attaching the presser foot, insert the bias tape into the funnel guide to match the tape edge to the guide side.

2. Pull the tape form the rear of the presser foot.

3. Snap on the presser foot.

4. Adjust the needle position so that the needle lines up to the edge of the bias tape.

Hint: If the needle does not position properly on the bias tape, loosen the position knob on the foot to slide the guide to the left or right.

 Compatible with Brother sewing machines.

Attaches bias tape with widths less than 7mm (1/4") using straight, zigzag or decorative stitches. With a tape guide, this makes attractive binding similar to pre-folded or unfolded bias tape.

Instructions for use

1. Before attaching the presser foot, insert the bias tape into the funnel guide to match the tape edge to the guide side.

2. Pull the tape form the rear of the presser foot.

3. Snap on the presser foot.

4. Adjust the needle position so that the needle lines up to the edge of the bias tape.

Hint: If the needle does not position properly on the bias tape, loosen the position knob on the foot to slide the guide to the left or right.

 Compatible with Brother sewing machines.