You have no items in your shopping cart.
Filters
Search
Close

Brother Picot Foot 7mm - F039N

£13.32 excl VAT
Manufacturer: Brother
Brother Picot Foot Decorative narrow hemmer foot for picot hem finishes. Picot foot looks similar to narrow hemmer foot but is designed to create a shell look edge on lightweight fabric.
+ -
  • Free Delivery Available (Over £50)
  • Contact Us For International Delivery

Handy for use when sewing special fabric edges like frills. For shell effect when hemming in zigzag stitch.

 

Instructions for use

1. Increase upper thread tension

2. Place the fabric with the wrong side facing up under the presser foot

3. Lower the needle into the fabric approximately 1/8" from the edge and sew 2-3 stitches.

4. Raise the needle and the presser foot

5. Hold the fabric from the back and front and roll it into the curled part of the foot.

6. Position the edge of the fabric behind the needle and lower the presser foot.

7. Slowly sew 2-3 stitches, making sure the fabric is rolling around the curled part of the foot.

8. Continue to sew to the end of the fabric.

 

 

Handy for use when sewing special fabric edges like frills. For shell effect when hemming in zigzag stitch.

 

Instructions for use

1. Increase upper thread tension

2. Place the fabric with the wrong side facing up under the presser foot

3. Lower the needle into the fabric approximately 1/8" from the edge and sew 2-3 stitches.

4. Raise the needle and the presser foot

5. Hold the fabric from the back and front and roll it into the curled part of the foot.

6. Position the edge of the fabric behind the needle and lower the presser foot.

7. Slowly sew 2-3 stitches, making sure the fabric is rolling around the curled part of the foot.

8. Continue to sew to the end of the fabric.