1. DTF(Direct To Film) products works with almost all types of fabrics including 100% polyester with good quality results !
2. Does not require pre-treatment and use minimum 75% less DTG inks on to get good quality .
3. The Fabrics  designed  good wash characteristics.
4. The fabric has very slight hand feel touch
5. The process is much faster than Vinly printing.
6. You don t need DTF printer or DTF inks ,with Ecofreen use your DTG inks!!!!

1. Print the image onto the matte side of film in mirror mode. (CMYK >> White ink) 

2. Apply Ecofreen hot melt powder evenly and remove the excess powder.

3. Hovering to bake the hot melt powder (170°C, 5min)

4. Transfer the image by heat press at 140°C for 15sec with medium pressure. 

5. Cold peel (remove the film gently)

6. Heat press again for curing (140°C, 5 sec) with medium pressure.