You have no items in your shopping cart.
Filters
Search
Close

Janome Blind Stitch Foot

Manufacturer: Janome
Blind hemming can sometimes be a little tricky so the Janome Blind stitch foot goes some way to help improve this technique. The foot has a metal guide in the centre and three lines struck on the underside. During blind hemming, the fold of the fabric fits snugly against the guide in the foot for accuracy whilst the lines underneath help to prevent unnecessary slipping. The needle will swing over the metal guide creating slack in the upper tension so that the pick of the stitch is almost invisible.
£21.00 inc VAT
*
+ -

Category Information

When purchasing this foot you will be asked to choose the correct category for your machine. If you are not sure which category your machine falls under. Please give us a ring on 01633 284646 and we will be able to help you.

Category A - These machines have a front loading bobbin and a stitch width of maximum 5mm

Category B - These machines have a top loading bobbin and a low shank maximum stitch width of 7mm examples of these machines are Janome CXL301, XL601, 2522LE, MC4800

Category C -These machines have a top loading bobbin and a high shank with maximum stitch width of 7mm examples of these machines are Janome MC11000SE, MC7700QCP, MC6600P

Category D - These machines have a top loading bobbin system and a high shank with maximum stitch width of 9mm examples of these machines are Janome MC12000, Janome MC15000, Janome MC9900 and Janome Atelier 5.

Also please note that the images in this category are representative of the foot or accessory. The one you actually recieve may differ slightly but will be suitable for performing the appropriate function on your machine.

Category Information

When purchasing this foot you will be asked to choose the correct category for your machine. If you are not sure which category your machine falls under. Please give us a ring on 01633 284646 and we will be able to help you.

Category A - These machines have a front loading bobbin and a stitch width of maximum 5mm

Category B - These machines have a top loading bobbin and a low shank maximum stitch width of 7mm examples of these machines are Janome CXL301, XL601, 2522LE, MC4800

Category C -These machines have a top loading bobbin and a high shank with maximum stitch width of 7mm examples of these machines are Janome MC11000SE, MC7700QCP, MC6600P

Category D - These machines have a top loading bobbin system and a high shank with maximum stitch width of 9mm examples of these machines are Janome MC12000, Janome MC15000, Janome MC9900 and Janome Atelier 5.

Also please note that the images in this category are representative of the foot or accessory. The one you actually recieve may differ slightly but will be suitable for performing the appropriate function on your machine.