You have no items in your shopping cart.
Filters
Search
Close

Janome Concealed Zipper Foot

£17.50 excl VAT
Manufacturer: Janome
The Janome Concealed Zipper Foot is an essential foot if you want to fit zips successfully and have that professional finish. Invisible zips are suitable for all fabrics from fine silk jersey through to suit weight wool's and tweeds, once fitted they will be virtually invisible and will merely look like part of the seam.
*
+ -
  • Free Delivery Available (Over £50)
  • Contact Us For International Delivery

Category Information

When purchasing this foot you will be asked to choose the correct category for your machine. If you are not sure which category your machine falls under. Please give us a ring on 01633 284646 and we will be able to help you.

Category A - These machines have a front loading bobbin and a stitch width of maximum 5mm

Category B - These machines have a top loading bobbin and a low shank maximum stitch width of 7mm examples of these machines are Janome CXL301, XL601, 2522LE, MC4800

Category C -These machines have a top loading bobbin and a high shank with maximum stitch width of 7mm examples of these machines are Janome MC11000SE, MC7700QCP, MC6600P

Category D - These machines have a top loading bobbin system and a high shank with maximum stitch width of 9mm examples of these machines are Janome MC12000, Janome MC15000, Janome MC9900 and Janome Atelier 5.

Also please note that the images in this category are representative of the foot or accessory. The one you actually recieve may differ slightly but will be suitable for performing the appropriate function on your machine.

Category Information

When purchasing this foot you will be asked to choose the correct category for your machine. If you are not sure which category your machine falls under. Please give us a ring on 01633 284646 and we will be able to help you.

Category A - These machines have a front loading bobbin and a stitch width of maximum 5mm

Category B - These machines have a top loading bobbin and a low shank maximum stitch width of 7mm examples of these machines are Janome CXL301, XL601, 2522LE, MC4800

Category C -These machines have a top loading bobbin and a high shank with maximum stitch width of 7mm examples of these machines are Janome MC11000SE, MC7700QCP, MC6600P

Category D - These machines have a top loading bobbin system and a high shank with maximum stitch width of 9mm examples of these machines are Janome MC12000, Janome MC15000, Janome MC9900 and Janome Atelier 5.

Also please note that the images in this category are representative of the foot or accessory. The one you actually recieve may differ slightly but will be suitable for performing the appropriate function on your machine.

Customers who bought this item also bought

Janome Bias Binder Foot

The Janome Bias Binder Foot is used to apply pre-folded bias binding to the edge of fabric in one easy step. It is equipped with a small funnel to fold and guide the binding over the fabric edge before it reaches the needle and can be used with either zig zag or decorative stitches as well as straight stitch. 10mm - 14mm bias tape can be used.
£17.50 excl VAT

Janome Applique Foot

When doing applique we often use the standard satin stitch foot or, more recently, the open toe satin stitch foot for greater visibility. However, Janome also has a dedicated "Applique Foot" in its range of accessories which really makes this creative task so much easier. It also has the added benefit of an elevated heal which allows a close satin stitch to be sewn and move more smoothly without being flattened into the fabric. It is also shorter than the other feet making it easier for maneuvering around curves and corners which can sometimes be a little tricky. *Please note: Because of the elevated heel on this foot it is only compatible with machines that have the extra heel ledge on the back of the foot holder.
£17.50 excl VAT

Janome Bobbins

Janome plastic bobbins, pack of 10 for all Janome home use models.
£6.67 excl VAT