You have no items in your shopping cart.
Filters
Search
Close

Super Quality DTF Film A3 Size Ecofreen /200 Sheet

Delivery date: 1-2 days
High Quality 297 x 520mm -Cold Peel or warm peel -Less ink - Anti Static -Extra Ink Loading -Anti Scratches -No Oil from the Film -High Resolution -Consistent Quality & Coating
£109.00 inc VAT
Optimised for the Epson SC-F2100 , F2200 and SC-F3000 DTG Printers but works with most of all kind of DTG and DTF inks.
+ -
  1. DTF(Direct To Film) products works with almost all types of fabrics including 100% polyester with good quality results !
  2. Does not require pre-treatment and use minimum 75% less DTG inks on to get good quality .
  3. The Fabrics  designed  good wash characteristics.
  4. The fabric has very slight hand feel touch
  5. The process is much faster than Vinly printing.
  6. You don t need DTF printer or DTF inks ,with Ecofreen use your DTG inks!!!!

1. Print the image onto the matte side of film in mirror mode. (CMYK >> White ink) 

2.Let ink dry about 1 min before applying the powder on otherwise the powder will smeared into ink layer and will leave images on film.
 
3.Apply the powder evenly
 
4.Flick off film with fingers to remove the excess of powder.
 
5.Howder to melt the powder completely (Heat press 160-170 degree for 3-4 min)
 
6.Transfer the image with light pressure 160-165 degree for 10 sec.
 
7.Warm or cold peel
 
8. For better washability cure for another 5 sec.
 

 

  1. DTF(Direct To Film) products works with almost all types of fabrics including 100% polyester with good quality results !
  2. Does not require pre-treatment and use minimum 75% less DTG inks on to get good quality .
  3. The Fabrics  designed  good wash characteristics.
  4. The fabric has very slight hand feel touch
  5. The process is much faster than Vinly printing.
  6. You don t need DTF printer or DTF inks ,with Ecofreen use your DTG inks!!!!

1. Print the image onto the matte side of film in mirror mode. (CMYK >> White ink) 

2.Let ink dry about 1 min before applying the powder on otherwise the powder will smeared into ink layer and will leave images on film.
 
3.Apply the powder evenly
 
4.Flick off film with fingers to remove the excess of powder.
 
5.Howder to melt the powder completely (Heat press 160-170 degree for 3-4 min)
 
6.Transfer the image with light pressure 160-165 degree for 10 sec.
 
7.Warm or cold peel
 
8. For better washability cure for another 5 sec.