• Visit Our Showroom
  • Call: 01633 281555
  • Downloads

Ecofreen DTF Printing Samples

£13.00 inc VAT
Package contain Ecofreen DTF Film , DTF Ecofreen Hot Melt Powder and instructions.

Free shipping

5 in stock
Delivery date: 1-2 days
  • Free Delivery Available (Over £50)
  • Contact Us For International Delivery
-DTF printing on any polyester garment with DTG inks and your existing DTG printer!
-Working extensively with Ecofreen, we offer DTF(Direct To Film) products that work with almost all types of fabrics including 100%     polyester, nylon, leather etc. with high quality results!
-The process does not require pre-treatment and uses a minimum of 75% less DTG inks.
-The fabrics once printed offer great wash characteristics and longevity.
-The print has a soft "hand" feel.
-This process is much faster than vinyl printing with no weeding required..
-You do not need a specialist DTF printer or DTF inks, with Ecofreen you simply use your DTG printer and DTG inks.

1. Print the image onto the matte side of film in mirror mode. (CMYK >> White ink) 

 

2. Apply Ecofreen hot melt powder evenly and remove the excess powder.

3. Hovering to bake the hot melt powder (170°C, 5min)

4. Transfer the image by heat press at 140°C for 15sec with medium pressure. 

5. Cold peel (remove the film gently)

6. Heat press again for curing (140°C, 5 sec) with medium pressure.

Downloads
-DTF printing on any polyester garment with DTG inks and your existing DTG printer!
-Working extensively with Ecofreen, we offer DTF(Direct To Film) products that work with almost all types of fabrics including 100%     polyester, nylon, leather etc. with high quality results!
-The process does not require pre-treatment and uses a minimum of 75% less DTG inks.
-The fabrics once printed offer great wash characteristics and longevity.
-The print has a soft "hand" feel.
-This process is much faster than vinyl printing with no weeding required..
-You do not need a specialist DTF printer or DTF inks, with Ecofreen you simply use your DTG printer and DTG inks.

1. Print the image onto the matte side of film in mirror mode. (CMYK >> White ink) 

 

2. Apply Ecofreen hot melt powder evenly and remove the excess powder.

3. Hovering to bake the hot melt powder (170°C, 5min)

4. Transfer the image by heat press at 140°C for 15sec with medium pressure. 

5. Cold peel (remove the film gently)

6. Heat press again for curing (140°C, 5 sec) with medium pressure.

Customers who bought this item also bought