• Visit Our Showroom
  • Call: 01633 281555
  • Downloads

Janome Applique Foot

£19.00 inc VAT
When doing applique we often use the standard satin stitch foot or, more recently, the open toe satin stitch foot for greater visibility. However, Janome also has a dedicated "Applique Foot" in its range of accessories which really makes this creative task so much easier. It also has the added benefit of an elevated heal which allows a close satin stitch to be sewn and move more smoothly without being flattened into the fabric. It is also shorter than the other feet making it easier for maneuvering around curves and corners which can sometimes be a little tricky. *Please note: Because of the elevated heel on this foot it is only compatible with machines that have the extra heel ledge on the back of the foot holder.
Manufacturer: Janome
*
  • Free Delivery Available (Over £50)
  • Contact Us For International Delivery

Category Information

When purchasing this foot you will be asked to choose the correct category for your machine. If you are not sure which category your machine falls under. Please give us a ring on 01633 284646 and we will be able to help you.

Category A - These machines have a front loading bobbin and a stitch width of maximum 5mm

Category B - These machines have a top loading bobbin and a low shank maximum stitch width of 7mm examples of these machines are Janome CXL301, XL601, 2522LE, MC4800

Category C -These machines have a top loading bobbin and a high shank with maximum stitch width of 7mm examples of these machines are Janome MC11000SE, MC7700QCP, MC6600P

Category D - These machines have a top loading bobbin system and a high shank with maximum stitch width of 9mm examples of these machines are Janome MC12000, Janome MC15000, Janome MC9900 and Janome Atelier 5.

Also please note that the images in this category are representative of the foot or accessory. The one you actually recieve may differ slightly but will be suitable for performing the appropriate function on your machine.

Category Information

When purchasing this foot you will be asked to choose the correct category for your machine. If you are not sure which category your machine falls under. Please give us a ring on 01633 284646 and we will be able to help you.

Category A - These machines have a front loading bobbin and a stitch width of maximum 5mm

Category B - These machines have a top loading bobbin and a low shank maximum stitch width of 7mm examples of these machines are Janome CXL301, XL601, 2522LE, MC4800

Category C -These machines have a top loading bobbin and a high shank with maximum stitch width of 7mm examples of these machines are Janome MC11000SE, MC7700QCP, MC6600P

Category D - These machines have a top loading bobbin system and a high shank with maximum stitch width of 9mm examples of these machines are Janome MC12000, Janome MC15000, Janome MC9900 and Janome Atelier 5.

Also please note that the images in this category are representative of the foot or accessory. The one you actually recieve may differ slightly but will be suitable for performing the appropriate function on your machine.

Customers who bought this item also bought