The Janome Hemmer Foot sometimes referred to as the rolled hemmer is used to stitch the narrow rolled hems usually found on shirt tails, table linens and along the edge of frills. The hemmer is designed with a scroll shape feeder on top and a stitch groove on the underside which determines the width of the finished hem.

The Janome Hemmer Foot sometimes referred to as the rolled hemmer is used to stitch the narrow rolled hems usually found on shirt tails, table linens and along the edge of frills. The hemmer is designed with a scroll shape feeder on top and a stitch groove on the underside which determines the width of the finished hem.

Product Code: 200342003 The piping foot will have its limitations when using thicker piping including the heavy jumbo cord and this is when the adjustable zipper foot will be invaluable. A screw on type foot, it can be adjusted to fit snugly against the cord when covering your own piping or when attaching commercial piping. An excellent alternative.

Product Code: 200321006 Sewing on strung beads and pearls has always been a tedious task but the beading foot now goes some small way to alleviating this and to add pleasure to embellishing. Popular for bridal wear, evening wear, smart/casual or crafts, the beading foot set is a blessing. There are two feet available narrow groove for beads up to 2 mm in diameter and wide groove for beads 2.5 – 4 mm in diameter There are two separate feet in this set for our Category B/C machines. Please make sure you purchase the correct attachment for your particular machine. The foot with the narrow groove will attach strung beads up to 2mm in diameter. The foot with a wide groove will attach strung beads from 2.5mm - 4mm in diameter. These feet can also be used for attaching similar diameter decorative cords for embellishment. A definite choice for embellishment.

Product Code: 200313005 The bias binder foot is used to apply pre-folded bias binding to the edge of fabric in one easy step. It is equipped with a small funnel to fold and guide the binding over the fabric edge before it reaches the needle and can be used with either zig zag or decorative stitches as well as straight stitch. 10mm - 14mm bias tape can be used. Take the bind out of this tricky technique.

Product Code: 200428004 Feeding various kinds of fabric and uneven layers can be difficult when sewing buttonholes. That is why Janome created the Buttonhole Stabilizer Plate. This plate works in conjunction with Buttonhole Foot R to feed uneven layers smoothly - ensuring even and precise buttonholes, even on jeans, wool, fleece, or stretch fabrics. Fabric is sandwiched between the plate holder (with attached buttonhole foot) on top and the metal plate underneath to support fabric while feeding. The plate holder also includes markings to align the edge of the fabric for neat and tidy buttonhole placement. The plate is compatible with all Janome sewing machines that come with Automatic Buttonhole Foot R with a Curved underside.

Product Code: 202002004 This clever set is an update on the standard free motion foot. It consists of the foot holder and three interchangeable feet offering more convenience, improved operation and added value. The design of the foot holder offers a quieter more stable movement and means that no lever is placed over the needle clamp screw as with the standard free motion foot. Movement is linked solely with the presser foot bar rather than the needle bar resulting in a quieter operation at higher speeds. In addition, the fabric layers can be moved more easily as there is no delay between ascent of the needle and that of the foot after each stitch. The clearance between the foot and the fabric can now be adjusted with the top screw so that the foot simply skims the surface without impairment. The three interchangeable feet attach to the holder with a screw for maximum sturdiness and safety. They consist of a closed-toe foot, an open-toe foot and a clear view foot which is ideal for uneven surfaces and evenly spaced quilting. The clear view foot is also designed with 1/8" markings for even spacing when "Echo Quilting" eliminating the need to mark out your fabric beforehand.

Product Code: 200137003 Also known as the open toe satin stitch foot the open toe allows for a better view of the stitches as you sew and the wide groove on the underside allows satin and other decorative stitching to pass through unobstructed. Use this foot for quilting, monogramming, applique and cutwork There are certain sewing techniques that often require better visibility of stitches such as quilting, appliqué, cut work and craft work. The custom crafted foot solves all those problems allowing a much better view of the sewing in progress. A handy foot to have.

Janome 200339007 | Open-Toe Walking Foot with Quilting Guide The Even Feed Foot, sometimes referred to as the walking foot, is designed with a set of feed dogs which allow the fabric to feed without shirting and eliminates the problem of the under layer of fabric coming up short. The even feed foot is also great for topstitching, which can be spoilt due to irregularity of stitching. This is often caused by the bulk created with the seam allowance especially around collars and reveres. using the walking foot for topstitching will eliminate this problem and give perfect stitching every time.

Janome Janome Product Code : JAN078-D-202084000 Product Details Having problems lining up or evenly spacing your border designs? That problem can now be solved with the help of the Border Guide Foot. The secret of this great new foot lies in its red guide markings. The two sets of vertical red lines are calibrated to allow perfect spacing of rows whilst the horizontal red line matches the needle drop allowing you to accuratley line up the start of each new row of stitching.

The perfect foot for sewists who work with rulers! The 1/4” Ruler Foot was specifically designed to use for ruler work using Janome quilting rulers. The 1/4” cup height moves smoothly alongside the quilting ruler without allowing the ruler to slide over or under. With this foot, the needle drops a 1/4 inch away from the ruler to create the quilting line.

The Janome 1/4" Seam Foot is a popular foot with patch workers for that essential 1/4" seam. The guide on the foot enables you to sew a perfect 1/4" seam every time.

Janome 1600 / HD9 Adjustable Zipper Foot. The adjustable zipper foot makes insertion of the standard zips easy and more professional. Ideal for all types of standard zips from fine ones to heavy-duty zips. Also useful for piping as it can be adjusted to fit snugly against the cord when attaching commercial piping or when covering your own piping

The Taping Foot helps to feed seam tape binding when sewing garments in knit or stretch fabric. Use it on shoulder seams and armholes to prevent stretching. The foot can also be used to attach bias tape. The measuring hatch marks help make an accurate binding width, from 5mm to 20mm.

The narrow straight stitch foot is an ideal option to the standard presser foot. It is a perfect aid when sewing piping or flanged trimes and allows you to get up close giving you that neat professional finish.

Use this foot for perfect placement when stitching in the ditch.

Another useful sewing aid is the straight stitch foot with the special needle plate for sewing fine fabrics. Fine delicate fabrics sometimes need a little bit of extra care and this set is the perfect answer.

Product Code: 767827009

Janome 1600 / HD9 Adjustable Seam Guide. This accurate seam guide provides an easy reference for seam allowances helping you to sew faster and with more confidence. Place the edge of your fabric up against the raised edge of the guide and just sew.

This presser foot allows the insertion of invisible zips, making them quick and easy to fit.

A popular foot with patchworkers for that essential 1/4" seam. The guide on the foot enables you to sew a perfect 1/4" seam allowance, quickly and accurately. Great for piecing quilts and also for topstitching.

The set includes three different feet that attach to the holder with a screw for maximum sturdiness and safety. Also includes a darning plate. Feet included in the package are: Closed Toe Foot for general use with lace and catchable fabrics, Open Toe Foot for general use and extra visibility, and Clear View Foot for uneven surfaces and evenly spaced quilting.

This innovative new foot can smoothly control materials such as leather and vinyl which are prone to catch in the feed dogs. When using this foot, the base of the needle is clearly visible, making your work easier.

The Janome 3 Way cording foot will hold one, two or three fine cords or threads. Because they are attached to the foot the required design can be easily followed and the cords are perfectly placed. A variety of utility, or embroidery stitches can be sewn over the cords to couch them onto base fabrics. The choice of cord, thread and stitch are all contributory factor to the final effect.

Janome Twin Dual Feed Quilt Piecing 1/4 Foot OD (Cat D). One of the interchangeable feet for the AcuFeed Flex Twin holder, the 1/4" foot OD, sometimes referred to as the Quilt Piecing foot, is a quilters dream. It has a built-in flange to keep your seams right at 1/4" all the way around. Clips onto dual Acufeed foot holder which comes with your machine. For Janome Top Loaders Category D.

The piping foot will have its limitations when using thicker piping including the heavy jumbo cord and this is when the adjustable zipper foot will be invaluable. A screw on type foot, it can be adjusted to fit snugly against the cord when covering your own piping or when attaching commercial piping.

When doing applique we often use the standard satin stitch foot or, more recently, the open toe satin stitch foot for greater visibility. However, Janome also has a dedicated "Applique Foot" in its range of accessories which really makes this creative task so much easier. It also has the added benefit of an elevated heal which allows a close satin stitch to be sewn and move more smoothly without being flattened into the fabric. It is also shorter than the other feet making it easier for maneuvering around curves and corners which can sometimes be a little tricky. *Please note: Because of the elevated heel on this foot it is only compatible with machines that have the extra heel ledge on the back of the foot holder.

The Janome Bias Binder Foot is used to apply pre-folded bias binding to the edge of fabric in one easy step. It is equipped with a small funnel to fold and guide the binding over the fabric edge before it reaches the needle and can be used with either zig zag or decorative stitches as well as straight stitch. 10mm - 14mm bias tape can be used.

Blind hemming can sometimes be a little tricky so the Janome Blind stitch foot goes some way to help improve this technique. The foot has a metal guide in the centre and three lines struck on the underside. During blind hemming, the fold of the fabric fits snugly against the guide in the foot for accuracy whilst the lines underneath help to prevent unnecessary slipping. The needle will swing over the metal guide creating slack in the upper tension so that the pick of the stitch is almost invisible.

You will achieve quick and easy button sewing with the special button sewing foot. This foot has two bars that attach to the foot shank to provide extra stability and also has a textured, rubber sleeve to hold the button securely in place whilst sewing.

The Janome Button Shank Plate was originally designed to be used when sewing on buttons where a larger thread shank is needed especially for Jackets and Coats. However, it has become increasingly popular as an aid to overcoming the problems of thick seams such as those found on Denim Jeans. Most sewers have experienced the problem of thick seams either when dressmaking or doing home furnishings. When you come toa thick seam you either end up with a run of tiny stitches where you sew over the 'hump' or you try pulling your fabric through and risk breaking needles.

The Janome Buttonhole foot makes it possible to sew buttonholes longer than 2.5cm. It is also effective on tight areas such as cuffs where more freedom of movement is required than available with a sliding buttonhole foot.

The Janome Concealed Zipper Foot is an essential foot if you want to fit zips successfully and have that professional finish. Invisible zips are suitable for all fabrics from fine silk jersey through to suit weight wool's and tweeds, once fitted they will be virtually invisible and will merely look like part of the seam.

Product Code: 795818107 As the name suggests, the Clear View Foot gives you a better view of what you are sewing. Especially useful for decorative stitching it can also be used with any of the CoverPro attachments.

Product Code: 200341002 The Ditch Quilting Foot is designed with a centre position metal blade. This will follow your seam lines precisely allowing perfect 'in the ditch' quilting. used in conjunction with Janome variable needle positions, it is also perfect for top stitching or under stitching a facing. A tricky technique made easier.

The guide of this foot aligns edges/seams of fabric so that neatly parallel edge stitching and topstitching can be achieved with ease. Adjust the guide by turning the screw to match the edge/seam precisely

Product Code: 200349000 The embroidery foot is used for 'free hand' embroidery and darning to ensure proper stitch formation, minimise skipped stitches and puckering and also to protect your fingers whilst you move your fabric freely under the needle. Especially beneficial to those just learning how to do free hand embroidery.

Product Code: 200340001 The embroidery foot is used for 'free hand' embroidery and darning to ensure proper stitch formation, minimise skipped stitches and puckering and also to protect your fingers whilst you move your fabric freely under the needle. This open toe version greatly improves visibility of stitches and is especially popular with quilters and those just learning how to do free hand embroidery.

This particular gathering foot is only recommended for light to medium weight fabrics. For a more effective gather we recommend using the "ruffler attachment"

The Janome Hemmer Foot sometimes referred to as the rolled hemmer is used to stitch the narrow rolled hems usually found on shirt tails, table linens and along the edge of frills. The hemmer is designed with a scroll shape feeder on top and a stitch groove on the underside which determines the width of the finished hem.

The hemmer foot, sometimes referred to as the rolled hemmer is used to stitch the narrow rolled hems usually found on shirt tails, table linens and along the edge of frills. The hemmer is designed with a scroll shaped feeder on top and a straight groove on the underside which determines the width of the finished hem. There are three different sizes of hemmer foot available. The 4mm and 6mm hemmer feet are for medium to heavier fabrics and are available as a boxed set.

Pintucks are often associated with Heirloom Sewing especially children's clothes and christening gowns. But they can also give a whole new dimension to other aspects of sewing such as bed linen, table linen and other home furnishings. Pin tucks are tiny 'false tucks' created by sewing parallel rows of stitching using a 2mm twin needle. Using a Pin Tuck foot with the twin needle helps to space the tucks an equal distance apart. It has multiple grooves on the underside through which the pin tucks can ride as you sew the adjacent rows.

roduct Code: 200314006 If ready made piping cord is not available or if you just want to make your own, the piping foot is ideal for the job. The piping foot (sometimes mistakenly referred to as the cording foot) is designed with two grooves on the underside and will hold and cover the cord when making piping tape. It can also be used for attaching piping. Maximum cord size is 5mm. For larger cord size see 'Adjustable Zipper Foot'.

The Janome Roller Foot has rollers that roll against the fabric and act very much like the track on a bulldozer for sewing up and over heavy seams and uneven surfaces. Ideal for sewing heavy fabrics the rollers move freely between the foot and the feed dogs so that the foot rides easily over varying thicknesses. Also used to sew sticky leathers and vinyl.

Edge stitching could not get any easier with the Sliding Guide Foot! You can adjust the flange to sit up to a full inch away from the edge of the foot in seconds and create perfectly straight hems every time. The guide can be moved freely and easily by just lifting the lever in the back of the foot, instead of having to mess with an annoying screw. The clear markings make certain you know exactly where you want your foot to go.

The straight stitch foot is often used on very fine or very heavy fabrics. This particular foot is flat on the underside to provide an even pressure against the feed dogs and it has a round needle hole which offers the benefit of more support around the needle to prevent skipped stitches and puckering.

Use this foot for attaching tape to the edge of fabrics. Adjust the needle drop position with the thumb screw. Guide the fabric with the left hand and tape with the right hand

The Janome Ultra Glide Foot is molded from a special resin allowing easier sewing of fabrics that may otherwise stick to the standard metal foot i.e. ultra suede, vinyl, faux leather, plastic etc.

Product Code: 767404028 Moulded from a special resin allowing easier sewing of fabrics that may otherwise stick to the standard metal foot such as ultra-suede, vinyl, faux leather, plastic etc.