Janome Hemmer Foot Set (4mm & 6mm)
The hemmer foot, sometimes referred to as the rolled hemmer is used to stitch the narrow rolled hems usually found on shirt tails, table linens and along the edge of frills. The hemmer is designed with a scroll shaped feeder on top and a straight groove on the underside which determines the width of the finished hem. There are three different sizes of hemmer foot available. The 4mm and 6mm hemmer feet are for medium to heavier fabrics and are available as a boxed set.
- Free Delivery Available (Over £50)
- Contact Us For International Delivery
When purchasing this foot you will be asked to choose the correct category for your machine. If you are not sure which category your machine falls under. Please give us a ring on 01633 284646 and we will be able to help you.
Category A - These machines have a front loading bobbin and a stitch width of maximum 5mm
Category B - These machines have a top loading bobbin and a low shank maximum stitch width of 7mm examples of these machines are Janome CXL301, XL601, 2522LE, MC4800
Category C -These machines have a top loading bobbin and a high shank with maximum stitch width of 7mm examples of these machines are Janome MC11000SE, MC7700QCP, MC6600P
Also please note that the images in this category are representative of the foot or accessory. The one you actually recieve may differ slightly but will be suitable for performing the appropriate function on your machine.