DTF Inks and Consumables

This pigment ink has been formulated for DTF printing . Suitable for printers using Epson Print Heads. Use our paper(film) , powder and inks together to ensure you get the best print quality .

This pigment ink has been formulated for DTF printing . Suitable for printers using Epson Print Heads. Use our paper(film) , powder and inks together to ensure you get the best print quality .

This premium DTF yellow ink has been formulated for DTF printing . Suitable for printers using Epson Print Heads. Use our paper(film) , powder and inks together to ensure you get the best pure yellow print with your DTF.

This premium DTF black ink has been formulated for DTF printing . Suitable for printers using Epson Print Heads. Use our paper(film) , powder and inks together to ensure you get pure black print with your DTF.

This premium DTF white ink has been formulated for DTF printing . Suitable for printers using Epson Print Heads. Use our paper(film) , powder and inks together to ensure you to get pure brilliant white print with your DTF.

For any DTF printers

High quality DTF Pet film (transfer paper) Premium transfer paper. For use with for large format printers (330Mmm wide) Thickness 75.um . 100 m in roll. Curing temperature 160 degree 15 sec.

High quality DTF Pet film (transfer paper) Premium transfer paper. For use with for large format printers (450 mm wide) Thickness 75.um . 100 m in roll. Curing temperature 160 degree 15 sec.

High quality DTF Pet film (transfer paper) For use with 60cm large format printers (600Mmm) Thickness 75.um . 100m in roll. Curing temperature 160 degree 15 sec

High quality 300 mm X 100 m.

High Quality 610mm X 100 m

This powder can be cured in the oven, with a heat gun or under a heat press. To cure your transfers under a heat press you will need to follow these steps. 1. Place your transfer on top of a heat press pillow or heat press foam. 2. Lower the top heat plate until it’s approximately 1cm away from the transfer. 3. Cure the powder for around 5 minutes at 170 C or until melted.

The Black DTF powder dedicated to giving bit better quality on black garments. This powder can be cured in the oven, with a heat gun or under a heat press. To cure your transfers under a heat press you will need to follow these steps. 1. Place your transfer on top of a heat press pillow or heat press foam. 2. Lower the top heat plate until it’s approximately 1cm away from the transfer. 3. Cure the powder for around 5 minutes at 170 C or until melted.

High Quality 297 x 520mm -Cold Peel or warm peel -Less ink - Anti Static -Extra Ink Loading -Anti Scratches -No Oil from the Film -High Resolution -Consistent Quality & Coating

High Quality 35cm X 40cm - Cold Peel or warm peel -Less ink - Anti Static -Extra Ink Loading -Anti Scratches -No Oil from the Film -High Resolution -Consistent Quality & Coating

Image Armor Flushing Solution 1L For Long Storage

Cleaning solution for all Epson re-worked printers. Use to remove old ink before filling with Image Armor Inks.

For DTG & DTF Printing. Max film sixe 35cm X 45cm (14" X 17 ") . DTF powder depend of film ,melted in aprox settings 70 sec sec at 170 degree. Air filter machine available with.

-To use with DTF Oven

1 X Filter for PRINTLINE.UK DTF air filter machine

4 X Filter Sheet for PRINTLINE.UK DTF air filter machine

1 X Filter for PRINTLINE.UK DTF air filter machine